Dabco NE500/non-emission amine catalyst NE500

Dabco NE500/non-emission amine catalyst NE500


Product Name: Dabco NE500

Alias: Dabco NE500, Non-emitting Amine Catalyst NE500, Strong Gel Amine Catalyst NE500, Dabco Strong Gel Amine Catalyst

Product Description: Dabco NE500 non-emitting catalyst for polyurethane block foams

Product Physical Properties:

Appearance: colorless liquid


Density (25℃,g/cm3): 1.04

Water solubility: soluble in water

Flash point (PMCC,℃): >200

Hydroxyl value (mgKOH/g): 280

Brief introduction.

Dabco NE500 catalyst is a non-emissive tertiary amine used as a catalyst for polyurethane block sponges to promote urethane reactions.Dabco NE500 catalyst has reactive functional groups that react with the polyurethane matrix and therefore do not cause emissions.

Dabco NE500 catalyst is used in soft bulk sponge applications to meet the required specifications of Certipur or LGA. For polyurethane applications requiring low VOC and low emissions, Dabco NE500 catalyst is an alternative to DABCO 33-LV catalyst for non-emission needs.

Typical Physical Properties Table.

Appearance Colorless Clear Liquid

Specific Gravity 1.04

Viscosity @ 25°C mPa.s 1500

Water solubility @ 25°C soluble

Flash point, ℃ >200


Promote urethane (polyol-isocyanate) reaction

Non-emitting amine catalyst

Improves foam flow, can replace Dabco 33-LV catalysts

Reduces odor and VOC

Recommendations for Use.

Dabco NE500 catalyst is recommended for use in water-blown, methylene chloride (MC) or other alternative blowing agent block polyurethane foam systems. Dabco NE500 Catalyst is compatible with other commonly used polyurethane catalysts and additives and is readily miscible with polyols and polyol/water mixtures.

Product Usage:

Dabco NE500 is a non-emitting amine catalyst used to promote urea (water-isocyanate) reactions. It reacts into the polyurethane matrix so that no organic volatiles are generated;

Dabco NE500 is also used in flexible block foam (polyether and polyester) applications to meet Certipur or LGA requirements;

Dabco NE500 is a non-emitting catalyst that improves foam flow and can be used as a replacement for Dabco 33-LV catalyst;

Dabco NE500 can be used in any water-blown, methylene chloride-blown, etc. polyurethane block foam system.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse


200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:




86-152 2121 6908


86-021-5657 7830


Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)


Our Company

Since its establishment, the company has adhered to the service tenet of “integrity-based, customer first”, adhered to customer demand as the focus, market-oriented, adhered to technological innovation, management innovation and service innovation, and constantly implemented lean production, refined management, to provide customers with better products and services! The company has its own factory, research and development base, set up a strict scientific quality management system, and constantly committed to technological innovation, product innovation and management innovation, so as to ensure that our products have a certain competitiveness in the same industry. The factory is located in Jining City, Shandong Province, China, covering an area of 500 acres, and the current production capacity of various types of amines is 5,000 to 10,000 tons per year.

Our Advantages

Strict Quality Management
Our company strictly implements ISO9002 quality management standards and has established a complete quality management system to ensure the long-term stability of product quality.

Efficient Service
Our production is efficient and reliable, so we deliver on time and within delivery deadlines. At the same time, our team is always happy to help customers and strive to solve customer problems in a short time.

Competitive Price
We have long-term services in wholesale Polyurethane catalyst and have established long-term and stable cooperative relationships with many retailers and agents to provide our customers with reasonably priced products.

OEM Available
Our employee team has high R&D capabilities, superb design and development capabilities, skilled manufacturing technology, and rich product application experience, and can also meet OEM business needs.throughout the entire industry chain.