Products

Dabco NE600/no emission amine catalyst

Dabco NE600/no emission amine catalyst

Overview:

Product Name: Dabco NE600

Alias: Dabco NE600, non-emitting amine catalyst, amine catalyst Dabco NE600

Product Description: Non-emitting catalyst for polyurethane block sponge Dabco NE600

Product Physical Properties:

Appearance: light yellow liquid

Viscosity (25℃,mPa.s): 370

Density (25℃,g/cm3): 1.02

Water solubility: soluble in water

Flash point (PMCC,℃): 137

Hydroxyl value (mgKOH/g): 270

Description.

Dabco NE600 catalysts are balanced non-emitting tertiary amines used in the production of low emission polyurethane foams. Dabco NE600 catalyst reacts with the polyurethane matrix and therefore does not contribute to amine emissions.

Dabco NE600 catalyst is used in flexible polyurethane block foam applications to meet Certipur or LGA requirements.

Typical Physical Properties Table.

Appearance Light yellow transparent liquid

Specific Gravity 1.02

Viscosity @ 25°C mPa.s 370

Water solubility 25°C soluble

Flash point, ℃ 137

Characteristics

Balanced non-emissive catalyst

Promotes urea (water-isocyanate) reaction

Improves foam flow

Meets Certipur or LGA specifications in soft foam applications

Recommendations for Use.

Dabco NE600 catalyst is recommended for use in water-blown, methylene chloride (MC) or other alternative blowing agent block polyurethane foam systems. Dabco NE600 Catalyst is compatible with other commonly used polyurethane catalysts and additives and is readily miscible with polyols and polyol/water mixtures.

Product Uses:

Dabco NE600 is a non-emitting amine catalyst used to promote urea (water-isocyanate) reactions. It reacts into the polyurethane matrix so that no organic volatiles are generated;

Dabco NE600 is also used in flexible block foam (polyether and polyester) applications to meet Certipur or LGA requirements;

Dabco NE600 is a non-emitting catalyst that improves foam flow and can be used as a replacement for Dabco 33-LV catalyst;

Dabco NE600 can be used in any water-blown, methylene chloride-blown, etc. polyurethane block foam system.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 sales@newtopchem.com

Telephone:

86-152 2121 6908

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

Prev:
Next: